Tile Heating

 

The Comfort Heat under tile heating cables and mats can be used in a variety of under floor heating installations, suitable for large or small areas. Comfort Heat offers two types of under tile heating cables:

in-screed cable
The In-screed heating cable is installed in the cement screed beneath the tiles or any finished floor surface. In-screed heating has a fast response time and is commonly used in wet areas. The In-screed cable is a return cable system (only one end to be connected), has an output of 175W/m2 @100mm spacing and is available in pre-determined lengths with cold tails.
  APPLICATIONS :Direct & background underfloor heating
  CABLE TYPE :Twin conductor heating cable with earth screen
  CONSTRUCTION :Multi-stranded heating wire wound around kevlar core with double insulation, earth screen & sheath
  INSULATION RATING :4000 V
  RATED VOLTAGE :240 Volt AC
  RATED OUTPUT m2 :175W/m2
  COLD TAIL LENGTH :4 metre with splice connection
  CABLE DIAMETER :4.6mm
  CABLE STANDARD :IEC800 Class II
  WARRANTY :10 years

 

 
 

 

ultra-thin mats
Ultra-thin floor heating mats are used when no screed is being laid. The ulta-thin mats are installed directly beneath the floor covering in the tile adhesive, increasing floor level by only 3mm.They comes in both single and twin conducting mats, have an output of 160W/m2 and will reach set temperature in approximately 60min.
  APPLICATIONS :Direct & background underfloor heating
  CABLE TYPE :Single and twin conductor heating cable with earth screen
  CONSTRUCTION :Multi-stranded heating wire wound around kevlar core with double insulation, earth screen & sheath
  INSULATION RATING :4000 V
  RATED VOLTAGE :240 Volt AC
  RATED OUTPUT m2 :160W/m2
  COLD TAIL LENGTH :4 metre with splice connection
  CABLE DIAMETER :3mm
  CABLE STANDARD :IEC800 Class II
  WARRANTY :10 years