MIRROR HEAT
Mirror heat pads are specially designed to eliminate mirror condensation after a steamy shower, allowing for a clear mirror appearance. The ultra-thin heating element is taped on the rear of your mirror before being mounted on the wall.
Mirror heat pads come in 2 sizes and large mirrors and combine two pads side by side to expand clear viewing.
SIZES AND HEAT OUTPUT
| 360mm x 500mm | 50W | 240V |
| 570mm x 750mm | 100W | 240V |
| 390mm x 460mm (includes.transformer) | 50W | 24V |
INSTALLATION
Mirror Heat pads are taped to the back of a mirror before hanging. They are hard wired directly to a standard on/off switch by your electrician. Mirror Heat must be installed and connected in accordance with standards AS/NZ3000:2000. Electrical work must be carried out by a licensed electrician. On/Off switch is not supplied by Comfort Heat.
TECHNICAL DATA
| Heater Type : | Double insulated polyester film. Aluminium based heating element etched to surface |
| Supply Voltage : | 230/240V |
| Heater Thickness : | 0.4mm (Connection point 2mm) |
| Cable Length : | 1000mm |
| Protection : | IP34 class 2 |
| Surface Temperature : | Approx. 30 deg C (45 deg C max) |
| Warranty : | 5 years |