ELECTRIC UNDERFLOOR DIY KITS

APPLICATIONS

All Comfort Heat underfloor heating systems are available in kits. All kits include the required materials to complete the installation.

ELECTRIC UNDERFLOOR KIT INCLUSIONS

WARMTOUCH heating cables or mats
Electronic wall thermostat MTC/MCC/ETN with floor sensor
Floor Sensor Tube
Retaining Mesh or Strip
Metal retaining Clips and Pliers or Cable ties
Detailed Installation Instructions
Cable Design Layout
Electrical loads and wiring diagrams
Cable Watchdog (to detect damage during installation)

INSTALLATION

All kits arrive with a detailed installation guide with step by step instructions to install your heating cable. In addition you will receive a start to finish cable design layout displaying your cable layout plan.

ELECTRICAL REQUIREMENTS

You need a qualified electrician to do your final connection. All floor heating loads are supplied for you and your electrician.

SPECIAL REQUIREMENTS

All kits are quoted direct from the floor plan. All fixtures and walls must be clearly marked as floor heating is installed with a minimum 100mm clearance off walls or permanent fixtures. Comfort Heat must be informed of any expansion joints in the slab. Extremely large areas may require junction points.

TECHNICAL SUPPORT

Comfort Heat prides itself on excellent customer service and technical support. All our kits are supplied with a step by step installation guide and detailed design layout. If you, or your electrician have any installation questions or require any technical information please contact Comfort Heat on 1300 13WARM.