RADIATOR

img_hero_radiator

Hydronic radiator heating is suitable for all areas with any floor finish. Radiators can be installed in small rooms in conjunction with floor heating in the large open plan living areas, as wall space is usually limited in modern Australian living areas.

Radiators heat small rooms quickly, making them ideal for bedrooms and studies, as they heat the ambient air space, but offer no thermal mass.

 

RADIATOR TECHNOLOGY

Comfort Heat can source a range of radiators in any colour to suit your project. For information on the full range of designs and styles please contact our office.

 

HEAT OUTPUT

Depending on the scale and construction of your build, radiators are sized accordingly.  A combination of flow and supply temperature is balanced to suit the heat load requirement of a room.

 

INSTALLATION

Radiators can be floor or wall mounted, depending on the construction. Typically, supply pipe is installed prior to the walls and ceiling being sheeted, or before the floors are laid (timber).

 

SPECIAL REQUIREMENTS

Allowances need to be made to feed supply pipe within walls / ceilings / floors / risers.

 

TEMPERING VALVE

All radiators and heated towel rails are installed with a thermostatic tempering valve allowing you to adjust the temperature of each radiator (see below).

 

RADIATOR TECHNICAL DATA

Pipe Type Cross linked polyethylene pipe with oxygen barrier
Pipe Diameter 20-25mm

 

BROCHURE DOWNLOADS

E – brochure_Radiator