Get Adobe Flash player Install latest flash player if you can't see this gallery.

| SEARCH  

UNDER CARPET HEATING MAT

MILLIMAT


APPLICATIONS

The Millimat heating mat is specifically developed for warming carpeted floors. The Millimat is suitable for large or small areas. The Millimat has a fast response time and should reach your set temperature in the first hour.

CABLE TECHNOLOGY

The Millimat is double insulated heating cable woven into a textile webbing. The Millimat has a braided earth casing.

HEAT OUTPUT

The Millimat has a heat output of 160W per m² and is available in 300mm, 750mm and 1000mm wide fabricated mats, in a variety of pre-determined lengths. Comfort Heat staff select the correct mat for your heated area, with a 200mm clearance from walls and fixtures.

INSTALLATION

The Millimat is installed on top of the underlay and beneath the carpet. The mats are attached to the underlay with tape.

SPECIAL REQUIREMENTS

No sensor tube is used with under-carpet installations. The floor sensor is located between the heating wires.

Comfort Heat Australia is setting the standard for heat underlays and mats

TECHNICAL DATA

Cable Type Single conductor heating cable with earth screen
Construction Multi-stranded heating wire wound around kevlar core with double insulation, fully braided earth shield on a woven textile webbing
Insulation 4000 V
Rated Voltage 240 Volt AC; Rated output 160W/m²
Cold Tail Length 4 metre with splice connection
Cable Diam. 2mm
Cable Standard IEC800 Class II
Warranty 5 years

 

Copyright 2009 - Comfort Heat | Privacy | Terms of use | Sitemap | Bookmark & Share