ULTRA THIN HEATING CABLE
PV3L TWIN
APPLICATIONS
The PV3L TWIN heating cable is perfect for small areas where the heating is required to be installed in the tile adhesive. PV3L TWIN has a fast response time and will reach set temperature in 1 - 2 hours.
CABLE TECHNOLOGY
As the PV3L TWIN is a return cable system, installation is made simple as the mat can be rolled out with no return cable. (perfect for small bathrooms).
HEAT OUTPUT
The PV3L TWIN cable has a heat output of 160W per m² and is available in 300mm wide fabricated mats with pre determined lengths ranging from 3m to 12m. Comfort Heat staff can select the correct mat for your heated area, with a 100mm clearance from walls and fixtures.
INSTALLATION
The PV3L TWIN cable is installed directly to the sub-floor beneath the tiles in the tile adhesive. PV3L mats are attached to the floor with either hot glue, nylon anchors or tape. The tile adhesive is laid directly over the heating mat.
SPECIAL REQUIREMENTS
Due to the thin cable, the Comfort Heat ‘Sensor Tube’ (Ref: Sensor Tube Page) will need to be chased into the floor.