ULTRA THIN HEATING CABLE
PVS 5
APPLICATIONS
The PVS 5 heating cable is perfect for renovations or new homes where the heating is required to be installed in the tile adhesive (no sand and cement bed) usually due to floor height limitations. PVS 5 has a fast response time and will reach set temperature in 1 - 2 hours.
CABLE TECHNOLOGY
The PVS 5 is a flexible double insulated single cable system woven into a textile mat, with a multi-strand heating cable and kevlar core, giving superior strength.
HEAT OUTPUT
The PVS 5 cable has a heat output of 160W per m² and is available in 500mm wide fabricated mats and pre determined lengths ranging from 2m to 16m. Comfort Heat staff can select the correct mat for your heated area, allowing 100mm clearance from walls and fixtures.
INSTALLATION
The PVS 5 cable is installed directly to the sub-floor beneath the tiles in the tile adhesive. PVS 5 mats are attached to the floor with either hot glue, nylon anchors or tape. The tile adhesive is laid directly on top.
SPECIAL REQUIREMENTS
Due to the thin cable, the Comfort Heat ‘Sensor Tube’ (Ref: Sensor Tube Page.) needs to be chased into the floor. Comfort Heat must be informed of any expansion joints in the slab.