Get Adobe Flash player Install latest flash player if you can't see this gallery.

| SEARCH  

IN SLAB HEATING CABLE


APPLICATIONS

The inslab cable is suitable for large areas where the slab is used for heat storage. In slab heating has a slow response time and will take between 10 - 24 hours to heat up, depending on slab thickness and insulation. Off- peak power can be utilised for slab heating.

CABLE TECHNOLOGY

The in slab cable is a flexible double insulated single cable system, with a multi-strand heating cable, giving superior strength to prevent cable failure due to slab movement.

HEAT OUTPUT

The in slab cable has a heat output of 150W per m² at 200mm spacing and is available in pre-determined lengths ranging from 30m to 170m. Comfort Heat staff select the correct cable length for your heated area, with a 200mm clearance from walls and fixtures.

INSTALLATION

The in slab cable is installed before the slab is poured. The cable is attached to either the mesh (ie. F72) or the reinforcing rods that have 200mm centres (one direction only).

SPECIAL REQUIREMENTS

The cable can not be installed across expansion joints. Comfort Heat must be informed of any expansion joints in the slab. For large areas multiple cables will be installed.

TECHNICAL DATA

Cable Type Single conductor heating cable with earth screen
Construction Multi-stranded heating wire with double insulation, earth screen and sheath
Insulation 4000 V
Rated Voltage 230 Volt AC; Rated output 30W/m
Cold Tail Length 3.5 metre with splice connection
Cable Diam. 5mm
Cable Standard IEC800 Class II
Warranty 10 years

 

 

 

 

 

 

DOWNLOADS

Brochure - inslab



Get ADOBE Reader

Comfort Heat Australia is setting the standard for in slab heating cable

 

In Slab Construction

 

 

Copyright 2009 - Comfort Heat | Privacy | Terms of use | Sitemap | Bookmark & Share